A range of applications: KS-2100 MQL system is a compact, easy to operate, micro-controlled metalworking lubrication and cooling systems. Use of the product can improve the quality of the machined surface and save a lot of resources and protect the environment. It has been widely used in metal processing industry: Metal sawing, turning, milling, drilling, tapping, stamping, folding, plate bending, blanking, cold, etc., open gear lubrication, bearing lubrication; actual promotion in the country has played a very good energy saving effect. Bring considerable profits for enterprises and a good working environment. Second, the principle: After compressed air through the filter regulator (optional), by two two-way solenoid valve to control the open air supply (optional) can be achieved simultaneously with the processing equipment. Pneumatic precision frequency generator is used to control pneumatic micro pump work, after the pass into the air, liquid pressurized piston oil pressure increased discharge, after mixing driven by compressed air spray nozzle to the lubrication points. When the frequency generator off the gas supply, relying on spring return plunger pump suction and complete, waiting for the next work cycle. Third, the technical parameters of the input pressure range 0.3 ~ 0.7MPa oil supply frequency allows the range of 1 to 120 beats / min tank capacity 0.5L maximum pressure ratio 15: 1 pump displacement cc 0.01 ~ 0.03cc lubricant Scope (40 ℃ mm2 / s) 1 ~ 100 input voltage DC24V or AC220V low level switch without the oil port 1 to 2 Quad, the recommended use of fuel oil is recommended to use the application of pneumatic frequency generator operating frequency times / min fuel range (ml / h ) milling 10-3030-90 Band Saw 10-4530-135 10-6030-180 10-6030-180 drilling punching Turning 10-6030-180 10-6030-180